Lecture Capture - Pause and stop recordings

You should pause Lecture Capture recordings whenever you present copyrighted material or confidential information, and stop recordings whenever you finish a lecture early or hold personal discussions at the end of a lecture.

By default, Lecture Capture recording automatically begins at the booking start time, and runs for the duration of the booking. To allow for changeover time, all recordings commence five minutes after the allocated start time. When recording begins, the button in the lower-right of the touch panel screen will change from Not Recording to Recording as below.

Recording underway
Recording underway

You should Pause Lecture Capture recording whenever you present:

You should Stop Lecture Capture recording whenever you:

  • Finish a lecture early.
  • Hold personal discussions at the end of a lecture.

Pause recording

  1. Announce that you are about to pause the Lecture Capture, so that your listeners will expect an abrupt break in recording.
  2. Press the red Recording button in the lower-right of the touch panel and the pause menu will appear.
  3. Press the yellow Pause button. You will hear an audible confirmation to let you and your audience know recording has been paused.
Pause recording
Pause recording
  1. Press Return to return to the main touch panel menu. A red Recording is paused button will be displayed at the lower-right of the touch panel.

Resume recording

  1. Press the red Recording is paused button at the lower-right of the touch panel and the pause menu appears.
  2. Press the red Resume button and recording will be resumed.
  3. Press Return to return to the main touch panel menu. A red Recording button will be displayed at the lower-right of the touch panel.

Stop recording

Note: Once recording has been stopped it can NOT be resumed. While you are able to pause and resume recording, this is not the case if you stop the recording.

  1. Press the red Recording button at the lower-right of the touch panel and the pause menu appears.
  2. Press the blue Stop Recording button and a confirmation screen is displayed.
  3. On the confirmation screen, press and hold the red Stop Recording button for one (1) second. You will hear an audible confirmation to let you and your audience know recording has been stopped.
Press and hold the red Stop Recording button
Press and hold the red Stop Recording button
  1. You will automatically be returned to the main touch panel menu. A grey Not Recording notification appears in the lower-right of the touch panel.

Tips for creating a professional recording

This guide was last updated 07 Nov 2018.
Report any errors or omissions in this guide to lms-guides@lists.unimelb.edu.au

Print this guide

The LMS is a learning technology service provided by Learning Environments